Custom Toric Multifocal Contact Lens Design Case Study

Advantages of Prescribing the SpecialEyes 54 Multifocal Contact Lens Design

A patient with presbyopia and astigmatism presented with a desire to trial the SpecialEyes 54 Multifocal contact lens design. Previously, the patient tried a daily wear omafilcon B (62%) multifocal contact lens design, wearing a sphere in the right eye and toric in the left eye. However, after various trials he remained unsatisfied with both comfort and vision, particularly his near vision for work. The practitioner shared that the patient was only able to achieve 20/30 vision (with effort) at distance and near with his previous multifocal contact lenses. In addition, the practitioner mentioned that the patient is a heavy depositor. The following information was provided to design a set of trial custom soft multifocal contact lenses:

Keratometry Readings:
OD: 44.12@177/44.87@87
OS: 44.5@12/45.25@102

HVID:
OD: 11.50mm
OS: 11.50mm

Manifest Refraction:
OD: -3.0 -.50 x167 (+1.75 add)
OS: -4.0 -1.0 x003 (+1.75 add)

Pupil Size:
4.0mm in a regular room light setting

Using the SpecialEyes Arc Length Calculator and Multifocal Simulator, the following trial contact lenses were ordered and dispensed.

SpecialEyes 54 Multifocal Toric Trial Lenses:
OD: 8.00 / 14.4 -3.00 -0.50 x167 (+1.75 Add)
OS: 8.00 / 14.4 -3.75 -1.00 x003 (+1.75 Add)
OU Multifocal Optic Zones: 2.0mm near center zone and 3.5mm peripheral zone

Outcome:
Upon insertion, the patient was thrilled with the comfort and visual performance of the SpecialEyes 54 Toric Multifocal contact lens design. During a visual acuity assessment the patient was able to see 20/20 (-) at distance and 20/15 at near. There was no over refraction and slit lamp assessment revealed a good fit with no lens rotation. The patient was instructed to wear the lenses for a week to ensure vision and comfort remained stable. Shortly after, the practitioner called to order the patients year supply.

During a conversation with one of the SpecialEyes consultants, the practitioner attributed her patient’s success with the 54 Multifocal contact lens design to the following.

  • Deposit resistant material
  • Exceptional fit and stability
  • Ability to correct for the -.50 cylinder in the right eye
  • Axes available in 1 degree increments
  • Custom multifocal optic zones and pupil size fitting methodology

Conclusion:
The SpecialEyes 54 Multifocal has some unique advantages over other multifocal contact lens designs. For starters, the deposit resistant hioxifilcon material that retains its water content provides patients with excellent comfort throughout the day. Practitioners also have the ability to fine tune parameters and powers for a precision fit and prescription with exceptional stability. Finally, the customizable multifocal optic zones allow for the multifocal optics to be appropriately distributed based on the patient’s pupil for a nice balance of distance, near and intermediate vision.

To learn more about the SpecialEyes 54 Multifocal design and pupil size fitting methodology, click on the learn more button below.

Learn More about SpecialEyes' Multifocal Contact Lens Design

Until next time!

2 thoughts on “Custom Toric Multifocal Contact Lens Design Case Study

  1. Aeree Na

    Hello
    I would like to know the price of SpecialEyes 54 multifocal lenses and SpecialEyes toric.
    I do have an account with your company.
    Thank you!

    Reply
    1. SpecialEyes Post author

      Good morning Dr. Na,
      Thank you for reaching out to SpecialEyes! I have sent you an email regarding your request for information. Please let me know if I can be of further assistance, and have a wonderful day!
      Best regards,
      SpecialEyes

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *